SNIA S10-300 Exam Demo
“snia storage network management/administration”, also known as s10-200 exam, is a SNIA certification.
1.Some system servers contain valuable and frequently accessed data, manuals, and engineering drawings. These files do not change very often, but they need to be kept on reasonably fast, reliable storage to serve the needs of users. What would be an acceptable method of presenting these files for use?
A: Install an Arbitrated Loop Storage system off of the primary server.
B: Install a High availability storage system connected directly to all servers.
C: Install a new Ethernet segment and connect a NAS storage system for all users.
D: Install a full blown Fibre Channel switched SAN with high availability storage system.
Correct Answers: C
2.When deploying a copy on write backup solution that uses 3rd party copy, which two statements are true? (Choose two.)
A:No backup servers are required. A00-212
B:The NDMP engine must be loaded on the backup server
C:A backup server will still control the environment such as loading tapes.
D:The backup server must be able to see the 3rd party copy engine as well as the LUN to be backed up.
Correct Answers: C, D
3.Your company is planning to implement a new service, and needs to deploy two servers in a active/passive cluster maintaining a large repository of data. This data will include three sets of data:
Set 1 : Stream type data : 3MB Files on average : many thousands
Set 2 : Large file data : 200KB Files on average : many millions
Set 3 : Small file data : 15KB Files on average : hundreds of millions 310-200
The application developer is writing code that is specific to an implementation of clustering that requires block level access. Which solution does not degrade performance?
A: a RAID 5 grouping for set 3, while deploying set 1 and 2 on the same RAID 0+1 set
B: deploying set 1 and 2 as independent RAID 5 groupings, while deploying set 3 as a RAID 0+1 set
C: creating a single RAID 5 grouping on the array and using the OS to partition each of the three sets
D: creating a single RAID 5 grouping on the array and using the array to partition each of the three sets from the same pack of physical hard drives 70-503(VB)
Correct Answers: B
4.When deploying a copy on write backup solution that uses 3rd party copy, which two statements are true? (Choose two.)
A:No backup servers are required.
B:The NDMP engine must be loaded on the backup server
C:A backup server will still control the environment such as loading tapes.
D:The backup server must be able to see the 3rd party copy engine as well as the LUN to be backed up. HP0-X02
Correct Answers: C, D
5.A customer has a disk subsystem with eight ports. Each port delivers 200 MB/s. The customer wants a solution designed which allows access from 32 servers with no single point of failure. Which number of HBAs and the associated throughput, provide server access to the disk subsystem?
A: 16 HBAs, 75 MB/s
B: 32 HBAs, 90 MB/s 642-586
C: 64 HBAs, 25 MB/s
D: 64 HBAs, 50 MB/s
Correct Answers: C
6.A company needs to protect against data corruption using split mirror snapshots. Their RTO is 15 minutes and RPO is one hour. It takes 15 minutes to create an incremental split mirror snapshot. Which scenario fulfills their needs most efficiently?
A: Use one snapshot volume and incrementally establish it every 60 minutes.
B: Use one snapshot volume and incrementally establish it every 30 minutes.
C: Use two snapshot volumes and incrementally establish one volume every hour.
D: Use two snapshot volumes and incrementally establish one volume every 30 minutes. EX0-103
Correct Answers: D
7.A network backup server is attached to a SAN. The server’s two HBAs deliver 60 MB/s each to the tape devices. The tape library attached to the SAN includes 15 MB/s tape devices. Theoretically, how many tape devices are required to efficiently stream output from the tape server?
A: 4
B: 8
C: 12
D: 15
Correct Answers: B
8.A customer needs to develop a fault tolerant solution. They have implemented a two server cluster with application failover. They have two split mirror snapshots of their data and have implemented redundant Fabrics. Which solution should they implement?
A: each server in both Fabrics, each snapshot available to one host
B: each server in both Fabrics, each snapshot available to both hosts
C: each server in a separate Fabric, each snapshot available to one host 70-541(VB)
D: each server in a separate Fabric, each snapshot available to both hosts
Correct Answers: B
9.Your client is applying ILM principles as they develop a storage strategy. Which two processes are performed in the strategy phase? (Choose two.)
A:set storage goals
B:develop an idealized environment
C:define internal storage parameters used in the implementation
D:match requirements to infrastructure capabilities and attributes
Correct Answers: B, D
10.You have been tasked with identifying upgrade options for your networked storage. Which two should you do? (Choose two.)
A:Only select hardware and software that is SMI-S compliant. 70-634
B:Share all received information openly with all vendors involved.
C:Understand needs and requirements as well capabilities of your existing technology.
D:Enlist legal advice or support of your purchasing department when creating RFI, RFP, and RFQs.
Correct Answers: C, D
More Information:642-586 70-284 n10-003 9A0-061 EX0-103 HP0-S13 JN0-303 MB7-515 NS0-320
Related posts:
- The Advantages of an Offsite Server It is necessary for all business to have some type...
- IBM-000-842 certification Exam Demo 1.Which of the following IBM tools provides a total cost...
- IBM certification Exam 000-239 Demo 1.A small company is considering an eServer p5 solution but...